E-Bike Spec Glossary: What the Numbers Actually Mean
Every term used on our market pages, defined in one place — with a note on how often the number is
actually published. Of the 258 priced models in the dataset, the median battery is
720 Wh and the median price per Wh is $2.78.
Electrical terms
Watt-hour (Wh)
Energy stored in the battery: voltage × amp-hours. This is the number that predicts range, and the denominator in
price per Wh. A 48V 15Ah pack is 720 Wh. Where manufacturers publish volts and amp-hours but not watt-hours, we compute
it and tag the value as derived.
Amp-hour (Ah)
Charge capacity. On its own it says little about range, because a 20Ah pack at 36V stores less energy than a 15Ah pack
at 52V. Always convert to Wh before comparing.
Voltage (V)
Nominal electrical pressure. 36V, 48V and 52V dominate our dataset. Higher voltage allows the same power at lower
current, which matters above roughly 1,500 W; below that it mostly changes which chargers and controllers fit.
Motor power (W)
Nominal motor rating, usually continuous. It is a rough guide to assist strength, but not a measure of climbing
ability — torque and gearing matter more. In our data, power correlates with price at only about 0.25.
Torque (Nm)
Turning force at the motor or crank. It is the number that predicts hill-climbing and load-carrying. A 500 W motor
with high torque can out-climb a 750 W motor with low torque.
Torque density (Nm per 100 W)
A derived figure we use to separate motor types. In our dataset it clusters: roughly 7–13 Nm/100W for hub motors and
18–40 Nm/100W for mid-drives. Values far outside those ranges usually indicate a spec error or a marketing figure.
Price and value terms
Price per Wh ($/Wh)
Price divided by watt-hours. It measures what you pay for storage only — not motor, frame, brakes or warranty. The
median in our sample is $2.78; under $1.60 is good value, above $5.50 usually means a small pack or premium
positioning. Try the calculator.
MSRP
Manufacturer’s suggested retail price. We use MSRP rather than sale prices so comparisons do not depend on the week
you look. Discounts can move real prices well below it.
Mechanical and system terms
Mid-drive vs hub motor
A mid-drive drives the cranks and uses the bike’s gears; a hub motor drives the wheel directly. Mid-drives climb
better and feel more natural; hub motors are simpler and cheaper. Torque density is the quickest way to tell them apart
in a spec sheet.
Cadence vs torque sensor
A cadence sensor detects that the pedals are turning; a torque sensor measures how hard you push. Torque sensors give
proportional, natural assist and are a meaningful upgrade. They are rarely named in spec sheets, which is one reason
test rides still matter.
PAS and throttle
PAS (pedal-assist system) adds power while you pedal. A throttle adds power without pedalling, which changes the legal
class in many markets. Class 1 has no throttle; Class 2 does.
BMS (battery management system)
The circuit that balances cells and protects against over-charge, over-discharge and overheating. It is rarely
specified, but it is one of the differences between a cheap pack and a good one.
Cell brand
The manufacturer of the individual cells inside the pack — Samsung, LG, Panasonic and Sanyo are the names worth
seeing. Only about 13% of the models we track disclose a cell brand.
Controller
The electronics that convert battery power to motor phase current. Its current limit and voltage rating determine what
a motor can actually deliver, and whether a voltage upgrade is safe.
Display
The handlebar unit that shows speed, battery and assist level. Displays are protocol-specific: a replacement must match
the controller, which is why display model matters for repairability.
Legal and practical terms
Class 1, 2 and 3
US-style categories. Class 1: pedal assist to 20 mph, no throttle. Class 2: throttle, still 20 mph. Class 3: assist to
28 mph, usually with a speedometer. Class determines where you can ride and what safety equipment is required.
Payload capacity
The maximum total weight of rider plus cargo — not the bike’s weight. Listings often quote one and confuse it with the
other. Our weight coverage is about 18% of models, so treat both figures as things to verify.
Bike weight
Kerb weight, usually without accessories. It affects handling, transport and range, and it is published for fewer than
one in five models we track. See the weight disclosure page.
Quick reference
| Term | Formula / typical value | Why it matters |
|---|---|---|
| Wh | V × Ah | predicts range; denominator of $/Wh |
| $/Wh | price ÷ Wh | storage cost; median $2.78 in our data |
| Torque density | Nm ÷ W × 100 | separates hub (7–13) from mid-drive (18–40) |
| Class 3 | assist to 28 mph | legal use, helmet rules, brake requirements |
| Payload | rider + cargo limit | often confused with bike weight |
FAQ
What does Wh mean on an e-bike?
Watt-hours: stored energy, equal to voltage × amp-hours. It is the number that predicts range.
Is higher voltage better?
Not by itself. It reduces current for a given power, which helps high-power builds; range depends on watt-hours.
What is a good torque figure?
Compare torque per 100 W. Hub motors cluster around 7–13 Nm/100W, mid-drives around 18–40 Nm/100W in our data.