Bafang Error Codes: Complete Reference for BBS01, BBS02 and BBSHD
Bafang error codes
Bafang error-code reference: 24 codes quoted from manufacturer documentation, with the component and the model family each code applies to. Codes are anchored (e.g. #code-04) so a specific fault can be linked directly.
| Code | Meaning | Models / family | Component | Source |
|---|---|---|---|---|
| 04 | The throttle has fault. 2. Disconnect the throttle, If the problem still | not published | not published | source |
| 05 | position. improve, please change to a new throttle.(only) | not published | not published | source |
| 07 | Overvoltage protection | not published | not published | source |
| 08 | Please contact your retailer | not published | not published | source |
| 09 | Error with the Engine phase’s Please contact your retailer | not published | not published | source |
| 10 | has reached its maximum protection | not published | not published | source |
| 11 | Please contact your retailer | not published | not published | source |
| 12 | Please contact your retailer | not published | not published | source |
| 13 | Please contact your retailer | not published | not published | source |
| 14 | the controller has reached its maxi- | not published | not published | source |
| 15 | Please contact your retailer | not published | not published | source |
| 21 | Speed sensor Error mm | not published | not published | source |
| 25 | Torque signal Error | not published | not published | source |
| 26 | 2.Check the speed sensor for signs of damage | not published | not published | source |
| 27 | Overcurrent from controller Please contact your retailer | not published | not published | source |
| 30 | Communication problem | not published | not published | source |
| 33 | 2. If the error continues to occur, please con- | not published | not published | source |
| 35 | Detection circuit for 15V has an error Please contact your retailer | not published | not published | source |
| 36 | Please contact your retailer | not published | not published | source |
| 37 | WDT circuit is faulty Please contact your retailer | not published | not published | source |
| 41 | Please contact your retailer | not published | not published | source |
| 42 | Please contact your retailer | not published | not published | source |
| 43 | Please contact your retailer | not published | not published | source |
| 44 | Voltage of the single cell is too high Please contact your retailer | not published | not published | source |
Codes by component
unspecified: 24
Codes by model family
unspecified: 24
The same code number on other brands
The same number does not guarantee the same fault; the table shows what other manufacturers publish for that code.
| Code | Brand | Meaning | Source |
|---|---|---|---|
| 04 | KT (Kunteng) | Torque sensor signal Abnormality | source |
| 05 | KT (Kunteng) | Axis speed sensor Abnormality(only applied to torque) | source |
| 04 | KT (Kunteng) | Torque sensor signal Abnormality | source |
| 05 | KT (Kunteng) | Axis speed sensor Abnormality(only applied to torque) | source |
| 04 | KT (Kunteng) | Torque sensor signal Abnormality | source |
| 05 | KT (Kunteng) | Axis speed sensor Abnormality(only applied to torque sensor) | source |
| 12 | Yamaha | Communicatie met het display is onderbroken. |
source |
| 13 | Yamaha | Communicatiedata kan niet worden weergegeven. |
source |
| 33 | Yamaha | Abnormale nullastspanning. | source |
| 36 | Yamaha | Abnormale spanning (gedetecteerd tijdens bediening / overig). |
source |
| 37 | Yamaha | Abnormale spanning (gedetecteerd tijdens bediening bij lage snelheid). |
source |
| 35 | Yamaha | Abnormale spanning (gedetecteerd tijdens bediening / met hoge constante spanning). | source |
Questions this page answers
How many Bafang error codes are documented?
24 codes from 1 source pages.
Where does the meaning of each code come from?
Each row links to the manufacturer page or manual it was quoted from.
Related
- Controller wiring diagram (48V)
- Display / controller P-settings
- E-bike error code lookup table
- BBS01B 36V 250W specs
- BBS01B 48V W specs
How this page was built
Rows are assembled from the component specification table, the error-code table and the compatibility relation table. Each row keeps its source link; no value is inferred from a different model.
Every value above is taken from the linked source. Fields the source does not publish are marked "not published" rather than estimated.
Ryan Williams has spent over 8 years testing, repairing, and writing about electric bikes. He has personally ridden and reviewed 150+ e-bike models from brands like Lectric, Aventon, Rad Power, Super73, and dozens more.
Before founding EBIKE Delight, Ryan worked as a bicycle mechanic for 5 years at independent bike shops across California, where he specialized in e-bike conversions and electrical system diagnostics. He holds a Certificate in Electric Vehicle Technology from the Light Electric Vehicle Association (LEVA).
Ryan’s work has been cited by Electric Bike Report, Electrek, and BikeRumor. When he is not testing the latest e-bike on California backroads, he is in his workshop tearing down batteries and controllers to understand what makes them tick — and what makes them fail.
Areas of Expertise
E-bike performance testing and real-world range verificationBattery diagnostics, charging best practices, and safetyBrand comparisons: Lectric, Aventon, Rad Power, Super73, and moreError code troubleshooting across major e-bike systemsE-bike laws, registration, and compliance by state
Ryan believes every rider deserves honest, hands-on information — not marketing hype.