Ebike Market Data Technology Comparisons
E-bike market data: comparisons
Mid-Drive vs Hub Motor: What the Difference Actually Is
The motor position changes how a bike climbs, how it feels, what wears out, and what you can repair. In
our dataset of 258 priced models, the two designs separate cleanly on one number: torque per 100 W.
The one number that separates them
Divide torque by motor power and multiply by 100. Across 182 models where both figures are published, the median is
12.7 Nm/100W, with 60% below 14 and 24% above 18. The low group is
dominated by hub motors, the high group by mid-drives.
| Design | Typical Nm/100W | Where the motor sits |
|---|---|---|
| Hub (geared or direct) | 7–13 | in the wheel |
| Mid-drive | 18–40 | at the cranks |
How they behave
Climbing
A mid-drive turns the chain, so it can use the cassette’s low gears to multiply torque at the wheel. That is why a
250 W mid-drive can out-climb a 750 W hub motor on a steep grade. On flat ground the advantage mostly disappears.
Feel
Mid-drives usually pair with torque sensors and feel like an extension of your legs. Many hub bikes use cadence
sensors, which switch assist on and off rather than scaling it — a noticeable difference at low speed.
Wear and repair
Hub motors put no load through the drivetrain, so chains last longer. Mid-drives wear chains and cassettes faster, but
the motor itself is often easier to remove and service. A blown hub motor can mean a new wheel build.
Weight and handling
A hub motor adds weight at one end of the bike; a mid-drive keeps mass central. On a 30 kg cargo bike that difference
is small; on a 20 kg city bike it is noticeable when lifting.
Which to buy
- Flat commute, tight budget: hub. Simpler, cheaper, and the efficiency penalty is small at steady speed.
- Hills, cargo, or a natural pedal feel: mid-drive. The gearing advantage is real.
- Repairability in a small town: hub, because any shop can replace a wheel; mid-drive parts are brand-specific.
- High power (over 1,000 W): hub is common and cheaper, but check axle and torque-arm hardware.
How we measured it
We use published torque and nominal motor power. Where either is missing the model is excluded — 182 of the models
we track publish both. Values above roughly 40 Nm/100W are usually marketing figures or data errors rather than real
measurements, so treat the top of the range with suspicion.
What wears out, and what it costs
Hub motors put no load through the drivetrain: chains and cassettes last close to normal bicycle intervals. Mid-drives
push torque through the chain, so expect faster chain wear and, on powerful systems, more frequent cassette replacement.
Against that, mid-drive motors are usually easier to remove and service, and their controllers are often separate units
rather than potted into the hub.
Parts availability
Hub motors are close to commodity items: controllers, throttles and replacement wheels are widely available and cheap.
Mid-drive systems are brand-specific — a failed controller or torque sensor can mean a dealer part with a lead time. If
you live somewhere without a good e-bike shop, that difference can decide the purchase more than climbing performance.
FAQ
Is a mid-drive motor better than a hub motor?
It depends on the job. Mid-drives use the bike’s gears, so they climb better and feel more natural; hub motors are simpler, cheaper and easier to repair. For flat commuting a hub is often the better value.
How can I tell which one a bike has?
Look at where the motor sits: at the cranks (mid-drive) or in the wheel hub. In spec sheets, torque per 100 W is a useful signal — in our data 60% of models sit below 14 Nm/100W and 24% above 18.
Which is more reliable?
Hub motors have fewer moving parts and no drivetrain wear. Mid-drives put torque through the chain, so chains and cassettes wear faster — but they are easier to service on many bikes.
Related
Torque Sensor vs Cadence Sensor: Why the Bike Feels Different
Two e-bikes with the same motor and battery can feel completely different, and the reason is usually the
sensor that decides how much help to give. One measures that you are pedalling; the other measures how hard.
The difference in one sentence
A cadence sensor detects pedal rotation and switches assist on. A torque sensor measures pedal pressure
and scales assist proportionally. The first feels like a switch; the second feels like stronger legs.
What each feels like
Cadence
- Assist arrives shortly after you start pedalling, often at full strength for the selected level.
- At low speed or in traffic it can feel sudden; on steep climbs it may lag.
- Cheaper to build, common on budget hub-drive bikes.
Torque
- Assist rises smoothly with effort — push harder, get more help.
- Feels natural at low speed and when starting from a stop.
- Costs more, and is usually paired with mid-drive systems.
Why the spec sheet rarely tells you
Most listings do not name the sensor type, and our own dataset does not track it — so we cannot rank models by sensor
here. What we can say is structural: in our data, high torque-per-watt models (the mid-drive cluster) are the ones most
likely to carry torque sensors, because that is how those systems are designed.
How to test it in five minutes
- Start from a stop in a low assist level. A torque sensor ramps up smoothly; a cadence sensor tends to lurch.
- Pedal very lightly on a flat road. Torque assist nearly disappears; cadence assist keeps pushing.
- Try a hill start. Torque sensors feel like they are helping you; cadence sensors feel like they are helping the bike.
Which to choose
- Exercise, hills, low-speed control: torque sensor.
- Flat commute, tight budget, throttle-style feel: cadence is acceptable.
- Cargo or child-carrying: torque, because smooth starts matter with weight on board.
What it means for battery life
Sensor type does not change the pack, but it changes how much power you draw. Cadence systems tend to run at a fixed
assist level whenever the pedals turn; torque systems scale with effort, so gentle riding draws less. On a large pack the
difference is modest; on a small one it is the difference between charging twice a week and once.
Can you upgrade?
Rarely. The sensor is integrated with the controller and, on cadence bikes, with the bottom bracket. Converting a
cadence bike to torque usually means replacing the bottom bracket, controller and display — which is most of the system.
It is cheaper to buy the bike you want than to convert one.
FAQ
Is a torque sensor worth the extra money?
If you ride for exercise or on hills, yes: assist scales with how hard you push, so the bike feels natural at low speed. For flat, short commutes a cadence sensor is adequate and cheaper.
Can I tell which sensor a bike has from the spec sheet?
Often not. Most listings do not name the sensor type, and our dataset does not track it, which is why this page explains the difference rather than ranking models.
Does a torque sensor improve range?
Usually yes, modestly. Because assist follows effort instead of switching on whenever the pedals turn, average power draw tends to be lower — but the effect depends far more on speed and terrain than on sensor type.
Related
Electric Bike vs Electric Scooter: Which One Actually Fits Your Day?
They look like the same category in a shop, and they are not. An e-bike is a bicycle with assistance; a
scooter is a small vehicle you stand or sit on and never pedal. The differences that matter are range, legality, safety
at speed, and what happens when the battery dies.
The short answer
- Commuting 5–20 miles, mixed surfaces, carrying things: e-bike.
- Short trips in a dense city, storing it in an apartment, lowest price: scooter.
- Anything involving hills, rain, or poor pavement: e-bike, because of wheel size and brakes.
Where the two actually differ
Range and refuelling
Both run on batteries, but only the e-bike can be pedalled when the charge runs out. That single difference decides
more purchases than any spec. On our e-bike dataset the median battery is 720 Wh, which at typical
consumption implies roughly 29–48 miles of assisted riding. Scooter packs are usually smaller
and the machine cannot help you home.
Safety at speed
Small wheels and a standing position make potholes and wet paint far more dangerous on a scooter. E-bikes put you on
20–28 inch wheels with hydraulic discs on most of the models we track. If your route includes anything other than smooth
pavement, this is the deciding factor.
Legality
Rules differ by country and city, and they are stricter for scooters in many places: helmet laws, speed limits, and
bans from sidewalks and some paths. E-bike classes (1, 2 and 3) are more widely recognised, which is why they are easier
to ride legally.
Cost
Our e-bike sample has a median price of $1,999 and a median of $2.78 per Wh. Scooters
generally start lower, but the comparison is not like for like: you are buying a vehicle with a smaller battery, smaller
wheels and no pedals. Compare total cost over five years, including a replacement battery, not the sticker.
What we would tell a first-time buyer
- Measure your actual trip. Under three miles in dense traffic, a scooter is hard to beat.
- Check the legal status where you ride, not where you buy.
- If you need to carry anything — groceries, a laptop, a child — the e-bike wins immediately.
- If storage is a stairwalk, weight matters more than range; a 20 kg scooter beats a 30 kg e-bike on a third floor.
Where our data comes from
The e-bike numbers on this page come from our dataset of 258 priced models (median 720 Wh,
$2.78/Wh). Scooter specifications are not part of that dataset, so we have deliberately kept the scooter side
qualitative rather than quoting figures we cannot verify.
Total cost over five years
Both machines cost far more to buy than to run. A replacement battery is the largest predictable expense, and it
arrives sooner on smaller packs because they cycle more often for the same distance. When comparing, ask three numbers:
the price of a replacement pack, its warranty length, and whether the pack is a standard shape that third parties sell.
A proprietary pack with no aftermarket is the hidden premium in this category.
Storage, theft and stairs
Scooters fold and are lighter, which matters if you carry them upstairs or lock them in a hallway. E-bikes are harder
to store but far harder to steal unnoticed, and most have removable batteries you can take with you. If your building has
no lift and no secure store, the scooter’s weight advantage outweighs its range disadvantage.
FAQ
Is an electric bike better than an electric scooter?
For distance, cargo and fitness, an e-bike is the more versatile machine: bigger wheels, real brakes, and a riding position that works on uneven ground. A scooter is simpler and often cheaper, but usually has smaller wheels, less range and fewer legal places to ride.
Can you pedal an electric scooter?
No. A scooter is throttle-only, so when the battery runs out you push it. An e-bike can be pedalled home.
Which is cheaper to run?
Both are cheap per mile. On our e-bike data the median battery is 720 Wh, so a full charge uses about 0.72 kWh — a few cents at residential rates. Most of the cost is the purchase price and battery replacement, not electricity.
Related
29% of E-Bikes Disagree With Themselves on Class and Speed
A Class 3 e-bike is defined by 28 mph assist; a Class 1 or 2 by a 20 mph ceiling. In our dataset
40 of 137 models that publish both numbers (29%) contradict each other.
The conflicts
| Model | Brand | Published class | Top speed (mph) |
|---|---|---|---|
| Brand specifications | Aostirmotor | 1 | 28 |
| Pace 4 Step-Through | Aventon | 2 | 28 |
| Pace 5 REC Step-Through | Aventon | 2 | 28 |
| eCB.3 | Batch | 3 | 20 |
| eFT.3 | Batch | 3 | 20 |
| Cyrusher Bronco Moped-Style | Cyrusher | 2 | 28 |
| Cyrusher Flex Step-Over Commuter | Cyrusher | 2 | 28 |
| Cyrusher Glider Cargo | Cyrusher | 2 | 28 |
| Cyrusher Kommoda 3.0 | Effortless Step-Throu | Cyrusher | 2 | 28 |
| Cyrusher Kommoda 3.0 Step-Through | Cyrusher | 2 | 28 |
| Cyrusher Path Step-Through City | Cyrusher | 2 | 28 |
| Cyrusher Ranger 2.0 Step-Over Full-Suspensio | Cyrusher | 2 | 28 |
| Cyrusher Roam Step-Thru Full-Suspension | Cyrusher | 2 | 28 |
| Cyrusher Rover Pro Step-Over Full-Suspension | Cyrusher | 2 | 28 |
| Cyrusher Sprint Step-Through City | Cyrusher | 2 | 28 |
| Kommoda Pro Step-through | Cyrusher | 2 | 28 |
| XF900 Pro Mountain Motorcycle-Style | Cyrusher | 2 | 28 |
| Hybrid for Spurs Fans | Heybike | 2 | 28 |
| Venus for Spurs Fans | Heybike | 2 | 28 |
| XPress2 Commuter | Lectric | 1 | 28 |
| XPress2 Commuter – Special Offer | Lectric | 1 | 28 |
| XPress2 Cruiser | Lectric | 1 | 28 |
| XPress2 Cruiser – Special Offer | Lectric | 1 | 28 |
| XPress2 Cruiser – Spooky Sale Bundle | Lectric | 1 | 28 |
| XPress2 Tempest Commuter | Lectric | 1 | 28 |
| XPress2 Tempest Commuter – Spooky Sale Bundl | Lectric | 1 | 28 |
| XPress Lite | Lectric | 1 | 28 |
| Asphalt ST | Mokwheel | 2 | 28 |
| Basalt 2.0 | Mokwheel | 2 | 28 |
| Obsidian 2.0 | Mokwheel | 2 | 28 |
| Obsidian ST 2.0 | Mokwheel | 2 | 28 |
| Scoria 2.0 | Mokwheel | 2 | 28 |
| Tarmac ST | Mokwheel | 2 | 28 |
| Lynx | QuietKat | 1 | 28 |
| Savage 2.0 Demo | Rambo | 1 | 30 |
| 500 Series (Discontinued) | Ride1Up | 3 | 20 |
| Core-5 (Discontinued) | Ride1Up | 3 | 20 |
| Roadster v3 | Ride1Up | 1 | 28 |
| TrailRush | Ride1Up | 1 | 28 |
| Centauri II | Vvolt | 3 | 12 |
Two patterns dominate. Either a bike is labelled Class 3 but lists a 20 mph top speed, or it is labelled Class 1/2
while listing 28 mph. The first usually means the class describes the software setting; the second usually means the
listing quotes the bike’s capability rather than its legal configuration.
Why this happens
- Class is a legal configuration, not a hardware spec. The same motor and battery can ship as Class 1 in Europe
and Class 3 in the US, and the listing may mix the two. - “Top speed” sometimes means unlocked speed. Some sellers quote the speed with the limiter off, while the class
refers to the shipped setting. - Model variants share a page. A single listing can cover several configurations, and the fields get filled from
different variants. - Simple listing errors. Some of these are just mistakes in the data we collected; we keep them visible rather
than silently “fixing” them.
Why a buyer should care
Class determines where you can ride, whether you need a helmet, and in some places whether the bike is legal at all.
A listing that says both “Class 2” and “28 mph” leaves you unable to know what will arrive. For a commuter choosing
between two similar bikes, that ambiguity is a bigger risk than a $100 price difference.
What to ask before buying
- What class is the bike configured as when it ships?
- Is the quoted top speed the limited or unlocked speed?
- Does the controller allow changing the limit, and does that change the legal class?
- Are the brakes rated for the higher speed if it can be unlocked?
How we counted
We only counted models where both a class and a top speed were published — 137 models. Class values were taken as
published; we did not treat our derived class (from speed) as a source of conflict. That makes this a conservative
count of genuine disagreements in the published data.
FAQ
How common are class/speed conflicts?
In our data 40 of 137 models (29%) that publish both a class and a top speed disagree with each other — either a Class 3 label on a 20 mph bike, or a Class 1/2 label on a 28 mph bike.
Does a class/speed conflict mean the bike is illegal?
Not necessarily. The label may describe the default software setting, while the quoted top speed is the hardware capability. But the buyer cannot tell which is which from the listing.
Which matters more, class or top speed?
For legal use, the class. For what the bike will actually do, the top speed. When they conflict, ask the seller to confirm the delivered configuration in writing.
Related
How this page was built
Rows come from the e-bike specification dataset used by the site’s market-data pages (version 2026-10-29). This pillar consolidates pages that previously existed as separate single-model pages; no value was added or estimated during the merge.
Fields the dataset does not publish are left blank rather than estimated.
Ryan Williams has spent over 8 years testing, repairing, and writing about electric bikes. He has personally ridden and reviewed 150+ e-bike models from brands like Lectric, Aventon, Rad Power, Super73, and dozens more.
Before founding EBIKE Delight, Ryan worked as a bicycle mechanic for 5 years at independent bike shops across California, where he specialized in e-bike conversions and electrical system diagnostics. He holds a Certificate in Electric Vehicle Technology from the Light Electric Vehicle Association (LEVA).
Ryan’s work has been cited by Electric Bike Report, Electrek, and BikeRumor. When he is not testing the latest e-bike on California backroads, he is in his workshop tearing down batteries and controllers to understand what makes them tick — and what makes them fail.
Areas of Expertise
E-bike performance testing and real-world range verificationBattery diagnostics, charging best practices, and safetyBrand comparisons: Lectric, Aventon, Rad Power, Super73, and moreError code troubleshooting across major e-bike systemsE-bike laws, registration, and compliance by state
Ryan believes every rider deserves honest, hands-on information — not marketing hype.