Shimano Error Codes: Complete Reference
Shimano error codes
Shimano error-code reference: 11 codes quoted from manufacturer documentation, with the component and the model family each code applies to. Codes are anchored (e.g. #code-e010) so a specific fault can be linked directly.
| Code | Meaning | Models / family | Component | Source |
|---|---|---|---|---|
| E010 | A system error was detected | not published | display | source |
| E013 | An anomaly was detected in the drive unit’s firmware | not published | display | source |
| E014 | The speed sensor may have been installed in the wrong position | not published | display | source |
| E020 | A communication error between the battery and drive unit was detected | not published | display | source |
| E021 | Battery connected to drive unit conforms with system standards but is not supported | not published | display | source |
| E022 | Battery connected to drive unit does not conform with system standards | not published | display | source |
| E023 | Electrical failure inside the battery | not published | display | source |
| E024 | Communication error with the bicycle system | not published | display | source |
| E025 | unit is not No system is displayed if of the cables | not published | display | source |
| E033 | disconnected. current doesn’t Power system provided | not published | display | source |
| E043 | of the cycle Power may be provided (EW-EN100) the two LEDs on one of the procedures | not published | display | source |
Codes by component
display: 11
Codes by model family
unspecified: 11
Questions this page answers
How many Shimano error codes are documented?
11 codes from 1 source pages.
Where does the meaning of each code come from?
Each row links to the manufacturer page or manual it was quoted from.
Related
How this page was built
Rows are assembled from the component specification table, the error-code table and the compatibility relation table. Each row keeps its source link; no value is inferred from a different model.
Every value above is taken from the linked source. Fields the source does not publish are marked "not published" rather than estimated.
Ryan Williams has spent over 8 years testing, repairing, and writing about electric bikes. He has personally ridden and reviewed 150+ e-bike models from brands like Lectric, Aventon, Rad Power, Super73, and dozens more.
Before founding EBIKE Delight, Ryan worked as a bicycle mechanic for 5 years at independent bike shops across California, where he specialized in e-bike conversions and electrical system diagnostics. He holds a Certificate in Electric Vehicle Technology from the Light Electric Vehicle Association (LEVA).
Ryan’s work has been cited by Electric Bike Report, Electrek, and BikeRumor. When he is not testing the latest e-bike on California backroads, he is in his workshop tearing down batteries and controllers to understand what makes them tick — and what makes them fail.
Areas of Expertise
E-bike performance testing and real-world range verificationBattery diagnostics, charging best practices, and safetyBrand comparisons: Lectric, Aventon, Rad Power, Super73, and moreError code troubleshooting across major e-bike systemsE-bike laws, registration, and compliance by state
Ryan believes every rider deserves honest, hands-on information — not marketing hype.